Short intro
Steel beds continue to dominate South Asian furniture markets because they sit at the intersection of durability, affordability, and local manufacturability. In 2026, rising steel input costs, logistics normalization, and higher demand from rental and urban housing markets have reshaped price bands without breaking the value proposition. This guide breaks down steel bed prices by type, size, and country, explains what actually moves prices, and shows where buyers still overpay for no reason.

SUMMARY BOX — WHAT YOU’LL LEARN

Typical price ranges (2026 snapshot)

India (retail, online + offline)

• Single steel bed frames: ₹5,500 – ₹22,000
• Double / queen steel beds: ₹10,500 – ₹38,000
• Storage or designer variants: ₹18,000 – ₹45,000

Bangladesh (retail)

• Single steel beds: BDT 5,500 – 15,000
• Double / branded beds: BDT 12,000 – 30,000+

Pakistan (retail)

• Iron / steel beds: PKR 25,000 – 85,000 depending on design and finish

Common sizes (5×7 / 6×7)

• Entry-level factory frames: ₹7,000 – ₹14,000 (or regional equivalents)
• Mid-range retail with plywood/storage: ₹15,000 – ₹28,000

What affects price the most

• Tube thickness and welding quality
• Powder coating vs stainless steel
• Storage boxes and plywood bases
• Brand markup vs local fabrication

1) INTRODUCTION

SEO snippet: Why steel beds remain the best value furniture category in South Asia.

Steel beds made from mild steel (MS) or stainless steel (SS) remain dominant in India, Bangladesh, and Pakistan because they match how people actually live. Urban rentals, hostels, PG accommodations, hospitals, and middle-income households value longevity over ornamentation. Steel delivers that cheaply.

In 2025–2026, three structural forces shaped pricing:

1. Steel input volatility stabilized, but at a higher base than pre-2022.
2. Labor and finishing costs increased, especially for powder coating.
3. Online retail normalized margins, reducing extreme underpricing.

As a result, prices rose modestly, but quality dispersion widened. Two beds at the same price can now differ massively in gauge, welds, and coating. This guide explains how to tell the difference.

LSI Keywords: metal bed price, iron bed cost, steel cot price, powder coated bed, mild steel bed price

2) STEEL BED PRICE (GENERAL OVERVIEW)

SEO snippet: National price bands and the real cost drivers behind them.

Across South Asia, steel bed pricing follows a consistent hierarchy:

• Basic single MS frames: cheapest, thin gauge, minimal welding
• Powder-coated double beds: value sweet spot
• Storage-equipped frames: price jumps sharply
• Stainless steel beds: premium category

In India, ₹6,000–₹15,000 remains the most competitive zone where buyers get acceptable gauge steel with powder coating. Below that, compromises are almost guaranteed. Above ₹30,000, buyers are paying for aesthetics, storage mechanisms, or branding rather than structural necessity.

Buying Tip (2026 reality):
Ask for steel gauge or tube thickness, not just “heavy quality.” Sellers avoid numbers when the steel is thin.

3) SINGLE STEEL BED PRICE

SEO snippet: The most economical steel bed segment, still the highest volume.

Single steel beds remain the backbone of:

• Student housing
• PG accommodations
• Hospitals and hostels

India (2026):

• Entry-level: ₹5,500 – ₹8,000
• Reinforced / foldable: ₹9,000 – ₹18,000

Bangladesh:

• BDT 5,500 – 13,000, higher for branded or plywood-supported models

Foldable designs gained popularity post-pandemic, but many sacrifice rigidity. Buyers should inspect hinge joints carefully.

Key mistake: assuming mattress inclusion. Most listings still sell frame-only.

4) DOUBLE STEEL BED PRICE

SEO snippet: Best value-to-space category with the widest price dispersion.

Double and queen-size steel beds show the largest pricing spread because of:

• Headboard design
• Storage boxes
• Plywood vs metal slats

India (2026 retail):

• Basic double frame: ₹8,500 – ₹14,000
• Mid-range with plywood: ₹12,000 – ₹22,000
• Storage variants: ₹18,000 – ₹40,000

Used markets and local workshops offer cheaper deals, but often at the cost of finish consistency and warranty.

Storage premium: expect +15–40% over a non-storage equivalent.

5) STAINLESS STEEL BED PRICE

SEO snippet: Higher upfront cost, lower lifetime headache.

Stainless steel beds occupy a niche but stable segment:

• Coastal regions
• High-humidity zones
• Medical and institutional use

Price bands (2026):

• Folding SS beds: ₹6,000 – ₹12,000
• Double SS beds: ₹18,000 – ₹35,000+

They cost more because stainless steel pricing is globally linked and fabrication is slower. But rust complaints drop to near zero.

Reality check: many “SS beds” are actually SS-coated MS. Ask for grade disclosure.

6) 6×7 STEEL BED PRICE

SEO snippet: King-size equivalent in South Asian markets.

A 6×7 steel bed is widely available and no longer a special order.

Typical pricing (2026):

• Basic powder-coated: ₹9,000 – ₹15,000
• With plywood/storage: ₹16,000 – ₹28,000
• Stainless steel: ₹22,000+

Mattress inclusion remains inconsistent. Always confirm.

7) RFL STEEL BED PRICE IN BANGLADESH

SEO snippet: Brand premium with predictable quality.

RFL remains one of the most trusted furniture brands in Bangladesh.

2026 pricing:

• Single beds: BDT 12,000 – 18,000
• Double beds: BDT 18,000 – 30,000

You pay more than local workshops, but you get:

• Warranty
• Consistent coating
• Standardized fittings

For institutional buyers, that reliability matters.

8) 5×7 STEEL BED PRICE

SEO snippet: The most liquid size in resale and classifieds.

The 5×7 size dominates second-hand and bulk trade markets.

India (2026):

• Used/basic: ₹7,000 – ₹10,000
• New retail: ₹11,000 – ₹20,000

This size offers the best balance for couples in compact urban rooms.

9) SINGLE STEEL BED PRICE IN BANGLADESH

SEO snippet: Strong low-end value with improving finishes.

2026 ranges:

• Budget frames: BDT 4,500 – 8,000
• Reinforced / plywood: BDT 9,000 – 15,000

Retailers like RFL, Hatil, and Daraz listings dominate branded sales, while local workshops serve the low-cost end.

10) STEEL BED PRICE IN PAKISTAN

SEO snippet: Design-driven market with strong local fabrication.

Pakistan’s steel bed market leans heavily toward decorative ironwork.

Price range (2026):

• Basic iron beds: PKR 25,000 – 40,000
• Designer/custom beds: PKR 45,000 – 85,000+

Local fabricators remain competitive, especially for custom sizing.

11) STEEL BED PRICE IN KOLKATA

SEO snippet: Hybrid market of workshops, classifieds, and national brands.

Kolkata offers:

• New retail: ₹6,500 – ₹26,000
• Used deals: often 20–35% cheaper

Buyers willing to inspect physically can extract excellent value.

12) CONCLUSION

SEO snippet: Steel beds still win on cost-per-year, not showroom shine.

In 2026, steel beds remain the most rational furniture purchase for value-focused buyers. Mild steel frames dominate entry and mid-tier markets, while stainless steel serves durability-focused niches. The smartest buyers ignore aesthetics first and verify gauge, welds, and coating quality before negotiating extras.

Steel beds are not cheap because they are inferior. They are cheap because they are efficient.